The eighth published set of pre-defined terms, Incoterms 2010 defines 11 rules, reducing the 13 used in Incoterms 2000 by introducing two new rules ("Delivered at Terminal", DAT; "Delivered at Place", DAP) that replace four rules of the prior version ("Delivered at Frontier", DAF; "Delivered Ex Ship", DES; "Delivered Ex Quay", DEQ; "Delivered Duty Unpaid", DDU). In the prior version, the rules were divided into four categories, but the 11 pre-defined terms of Incoterms 2010 are subdivided into two categories based only on method of delivery. The larger group of seven rules applies regardless of the method of transport, with the smaller group of four being applicable only to sales that solely involve transportation by water.
EXW – Ex Works (named place)
The seller makes the goods available at his/her premises. This term places the maximum obligation on the buyer and minimum obligations on the seller. The Ex Works term is often used when making an initial quotation for the sale of goods without any costs included. EXW means that a buyer incurs the risks for bringing the goods to their final destination. The seller does not load the goods on collecting vehicles and does not clear them for export. If the seller does load the goods, he does so at buyer's risk and cost. If parties wish seller to be responsible for the loading of the goods on departure and to bear the risk and all costs of such loading, this must be made clear by adding explicit wording to this effect in the contract of sale.
The buyer arranges the pickup of the freight from the supplier's designated ship site, owns the in-transit freight, and is responsible for clearing the goods through Customs. The buyer is responsible for completing all the export documentation. Cost of goods sold transfers from the seller to the buyer.
FCA - Free Carrier (named place of delivery)
The seller delivers the goods, cleared for export, to the carrier nominated by the buyer at the named place. It should be noted that the chosen place of delivery has an impact on the obligations of loading and unloading the goods at that place. If delivery occurs at the seller's premises, the seller is responsible for loading. If delivery occurs at any other place, the seller is not responsible for loading.
If the buyer nominates a person other than a carrier to receive the goods, the seller is deemed to have fulfilled his obligation to deliver the goods when they are delivered to that person.
CPT – Carriage Paid To (named place of destination)
The seller pays for carriage. Risk transfers to buyer upon handing goods over to the first carrier at place of shipment in the country of Export. The Shipper is responsible for origin costs including export clearance and freight costs for carriage to named place (usually destination port or airport). Shipper is not responsible for buying Insurance and for delivery to final destination (buyer's facilities).
This term is used for all kind of shipments.
CIP – Carriage and Insurance Paid to (named place of destination)
The containerized transport/multimodal equivalent of CIF. Seller pays for carriage and insurance to the named destination point, but risk passes when the goods are handed over to the first carrier. CIP is used for intermodal deliveries & CIF is used for Sea.
DAT – Delivered at Terminal (named terminal at port or place of destination)
This term means that the seller covers all the costs of transport (export fees, carriage, insurance, unloading from main carrier at destination port and destination port charges) and assumes all risk until destination port, import duty/taxes/customs costs to be borne by Buyer.
DAP – Delivered at Place (named place of destination)
Can be used for any transport mode, or where there is more than one transport mode. The seller is responsible for arranging carriage and for delivering the goods, ready for unloading from the arriving conveyance, at the named place. Duties are not paid by the seller under this term (an important difference from Delivered At Terminal DAT, where the buyer is responsible for unloading).
DDP – Delivered Duty Paid (named place of destination) Seller is responsible for delivering the goods to the named place in the country of the buyer, and pays all costs in bringing the goods to the destination including import duties and taxes. The seller is not responsible for unloading. This term is often used in place of the non-Incoterm "Free In Store (FIS)". This term places the maximum obligations on the seller and minimum obligations on the buyer. With the delivery at the named place of destination all the risks and responsibilities are transferred to the buyer and it is considered that the seller has completed his obligations 
Sea and Inland Waterway Transport
To determine if a location qualifies for these four rules, please refer to 'United Nations Code for Trade and Transport Locations (UN/LOCODE)'.
The four rules defined by Incoterms 2010 for international trade where transportation is entirely conducted by water are as per the below. It is important to note that these terms are generally not suitable for shipments in shipping containers; the point at which risk and responsibility for the goods passes is when the goods are loaded on board the ship, and if the goods are sealed into a shipping container it is impossible to verify the condition of the goods at this point.
FAS – Free Alongside Ship (named port of shipment)
The seller delivers when the goods are placed alongside the buyer's vessel at the named port of shipment. This means that the buyer has to bear all costs and risks of loss of or damage to the goods from that moment. The FAS term requires the seller to clear the goods for export, which is a reversal from previous Incoterms versions that required the buyer to arrange for export clearance. However, if the parties wish the buyer to clear the goods for export, this should be made clear by adding explicit wording to this effect in the contract of sale. This term can be used only for sea or inland waterway transport.
FOB – Free on Board (named port of shipment)
See also: FOB (Shipping)
The seller must advance government tax in the country of origin as off commitment to load the goods on board a vessel designated by the buyer. Cost and risk are divided when the goods are sea transport in containers (see Incoterms 2010, ICC publication 715). The seller must instruct the buyer the details of the vessel and the port where the goods are to be loaded, and there is no reference to, or provision for, the use of a carrier or forwarder. This term has been greatly misused over the last three decades ever since Incoterms 1980 explained that FCA should be used for container shipments.
It means the seller pays for transportation of goods to the port of shipment, loading cost. The buyer pays cost of marine freight transportation, insurance, unloading and transportation cost from the arrival port to destination. The passing of risk occurs when the goods are in buyer account. The buyer arranges for the vessel and the shipper has to load the goods and the named vessel at the named port of shipment with the dates stipulated in the contract of sale as informed by the buyer.
CFR – Cost and Freight (named port of destination)
Seller must pay the costs and freight to bring the goods to the port of destination. However, risk is transferred to the buyer once the goods are loaded on the vessel. Insurance for the goods is NOT included. and This term is formerly known as CNF (C&F, C+F or CF).
CIF – Cost, Insurance and Freight (named port of destination)
Exactly the same as CFR except that the seller must in addition procure and pay for the insurance.
Allocations of costs to buyer/seller according to Incoterms 2010
|Incoterm 2010||Export customs declaration||Carriage to port of export||Unloading of truck in port of export||Loading on vessel in port of export||Carriage (Sea/Air) to port of import||Insurance||Unloading in port of import||Loading on truck in port of import||Carriage to place of destination||Import customs clearance||Import taxes|
|DDP||Seller||Seller||Seller||Seller||Seller||Seller||Seller||Seller||Seller||Seller||Seller/Not including VAT/FAT|
Previous terms from Incoterms 2000 eliminated from Incoterms 2010
DAF – Delivered at Frontier (named place of delivery)
This term can be used when the goods are transported by rail and road. The seller pays for transportation to the named place of delivery at the frontier. The buyer arranges for customs clearance and pays for transportation from the frontier to his factory. The passing of risk occurs at the frontier.
DES – Delivered Ex Ship
Where goods are delivered ex ship, the passing of risk does not occur until the ship has arrived at the named port of destination and the goods made available for unloading to the buyer. The seller pays the same freight and insurance costs as he would under a CIF arrangement. Unlike CFR and CIF terms, the seller has agreed to bear not just cost, but also Risk and Title up to the arrival of the vessel at the named port. Costs for unloading the goods and any duties, taxes, etc. are for the Buyer. A commonly used term in shipping bulk commodities, such as coal, grain, dry chemicals; and where the seller either owns or has chartered, their own vessel.
DEQ – Delivered Ex Quay (named port of delivery)
This is similar to DES, but the passing of risk does not occur until the goods have been unloaded at the port of discharge.
DDU – Delivered Duty Unpaid (named place of destination)
This term means that the seller delivers the goods to the buyer to the named place of destination in the contract of sale. A transaction in international trade where the seller is responsible for making a safe delivery of goods to a named destination, paying all transportation expenses but not the duty. The seller bears the risks and costs associated with supplying the goods to the delivery location, where the buyer becomes responsible for paying the duty and other customs clearing expenses.
source: http://en.wikipedia.org/wiki/Incoterm Al Ryan makes every effort to ensure that the information that appear on its website is true and up-to- date. However, errors or omissions may occur, and for this reason, the User should not consider information to be accurate without first checking the accuracy of the information with Freightfly. None of the information or content on this website should be considered as an indubitable fact. Al Ryan cannot control how the User utilizes the information or content offered on this website and will therefore not be held responsible for deeds, acts or damages, whether direct or indirect, suffered by the User or third- parties which could be the consequence or arise from the use of said information or content. **The above text is just a small introduction to the incoterms. If you want to learn more, please buy the more detailed incoterms 2010 book. This can be done at your International Chambre of Commerce (ICC) or at the following website:http://www.iccbooks.com/Product/ProductInfo.aspx?id=653